D.Module.VC33
The D.Module.VC33 is a low-power, universal floating-point DSP system, based on the Texas Instruments TMS320VC33 processor.
This is a legacy product, which is still in full production, however, not recommended for new designs. Please consider the D.Module2.C6747.
Specifications
DSP | TMS320VC33 | 150 MHz floating-point DSP |
Memory | DSP-internal | 34K Words |
SRAM | 256K Words 32-bit | |
Flash | 512K bytes NOR | |
UART | 1 | transmit and receive Fifo, DMA support, RS232: max 230,4K baud, automatic flow-control, optional RS422/485: max. 500K baud |
Serial Ports | 1 | independent receivers and transmitters, max. 33 Mbps throughput |
Timer | 2 | 32-bit |
GPIO | 32 | bit-wise programmable, input or output, XC3064XL user-programmable CPLD |
External Bus Interface | EMIF | asynchronous transfers, 32-bit data bus, 8M bytes address space, 2 pre-decoded chip selects, configurable timing |
System Supervisor | voltage and watchdog | |
Emulation Interface | JTAG | |
I/O Level | LVTTL / LVCMOS | 5V TTL/CMOS tolerant |
Power Supply | 3.3V | single supply, 100mA typ. |
Firmware | D.Module.BIOS | bootloader, board initialization, board configuration, flash memory programming, UART I/O |
Setup Utility | program and data file uploads to the flash memory via UART | |
Temperature Range | 0 – 70°C | |
Connectors | 2,54mm pitch through-hole connectors | |
JTAG | 14-pin, 2.54mm pitch | |
Mechanics | 85 x 59 mm, overall height: 15mm | |
ROHS | compliant |
Ordering Information
D.Module.VC33-150-D2 | standard module |
Options | -422 : RS422/485 UART line interface |