C6747 DSP + XDS510USB
From DSignT Support Database
Contents
1 Preparation
- Install CCS 3.3
- Install SpectrumDigital Emulator Driver
Driver (external link):
http://support.spectrumdigital.com/ccs33/Release-30330/setupCCSPlatinum_v30330.ZIP
2 Code Composer 3.3 Setup
2.1 Create Board
- select
- choose SD510 Emulator
- add the emulator to System Configuration on the left side
- in the new opened "Connection Properties" window type in a board name and press "next"
- select your emulators address (default 0x510) and press "finish"
2.2 Add IcePick Router
- add the ICEPICK_C router to your system configuration
- in the new opened "Router Properties" window name the router as you like and
- select the number of subpaths. in case of the L137 choose 3 subpaths
- in the next pane no input is needed, press next
- the number of subpath properties depends on the selected subpaths on the first pane:
- change path name and value as shown in the picture and press finish
2.3 Add Processor
- add processor from the center window to path17 on the left window
- in the new opened window enter a custom processor name, e.g. C6747, and a suitable GEL file and press OK
2.4 Final System Configuration
3 Code Composer 4.x Setup
3.1 New Target Configuration
- select: "target" - "New Target Configuration"
- enter custom filename, e.g.: D.Module2.C6747.ccxml
3.2 Basic settings
- the file you entered under "New Target Configuration" is opened
- select under "Connection"
- under "Device" enter filter text "C67" and select device
- press save
- the resulting configuration should look like:
4 Additional Tags
SpectrumDigital, TexasInstruments, Parallel Port, C674x, C6400+, C6400plus