D.Module.C6203
TMS320C6203 high performance fixed point DSP board
The D.Module.C6203 is a high performance fixed-point member of the D.Module family of business card sized digital signal processor boards. It is perfectly suited for demanding, standalone, embedded image processing applications. The unique architecture allows a glueless connection of many CMOS image sensors without extra frame grabber hardware. As with all members of the D.Module family, the D.Module.BIOS handles low-level hardware programming and lets you focus on the 'real' signal processing tasks.
Key applications are machine vision and biometrics. As a general purpose DSP board, the D.Module.C6203 however is perfectly suited to many other applications too. Special care has been taken to facilitate field maintenance and serviceability. The Setup Mode provides straightforward file upload for program and parameter updates via RS232 terminal. The Module Config File stores configuration data in human-readable ASCII format and provides script mechanisms to control system start-up. Setup mode also provides basic debug capabilities for field diagnostics without requiring special emulation hardware.
The modular, self-stacking concept facilitates building complete signal processing systems. Excellent system adaptability is provided by the integration of reconfigurable logic: Up to 32 I/O signals are user-programmable and can be configured to a variety of interfaces, ranging from bit-programmable I/O to I2C bus controller, quadrature encoder interfaces, PWM, CMOS image sensor interfaces, etc. Communicating with process control systems or multi-processor coupling is supported by two high-speed UARTs (up to 3 Mbaud) and three fast synchronous serial ports (up to 100 Mbit/s).
The TMS320C6203 DSP uses the VelociTI™ modified VLIW architecture, with up to eight instruction units operating in parallel. Supported by a large internal memory, the basis for highest image data throughput and outstanding performance is laid out. Data acquisition and memory block transfers are handled in background by a 4 channel DMA controller. The processor's Expansion Bus provides the high-speed data acquisition path, which is capable of transferring image data under DMA control without additional buffers or FIFOs.
| Product Features | ||
|---|---|---|
| DSP | TMS320C6203B | 300MHz, 32Bit fixed point, 4-channel DMA |
| Memory | DSP-internal | 512 Kbyte data and 384 Kbyte program memory |
| SDRAM | 16 Mbyte, 150 MHz operation, 32-bit wide | |
| Flash | 2 MByte, 8-bit wide, sector architecture | |
| UART | 2 | 16C752, max. 230.4 Kbaud RS232, 3 Mbaud RS422/485, 64 byte transmit and receive FIFOs, DMA support hardware and software auto flow-control one RS232 and one RS422/485 line interfaces |
| Expansion Port | 16-bit data | supports synchronous and asynchronous peripherals, DMA support |
| External Bus Interface | 32-bit data 20-bit address |
two pre-decoded memory areas, programmable timing and external wait states |
| Timer | 2 | 32 bit |
| Serial Ports | 3 | independent receiver and transmitter, up to 75 MBit/s throughput |
| GPIO | 16 32 if Expansion Port not used |
XC9572XL in-system programmable CPLD, 72 macrocells, in, out or bidirectional |
| Miscellaneous | Watchdog JTAG Emulation Interface |
|
| Software | D.Module.BIOS | initialization and programming algorithms for all on board resources |
| Setup Utility | RS232-based field maintenance tool for program and data uploads, User-CPLD reprogramming, diagnostics | |
| Module Config File | ASCII configuration file for application-specific settings | |
| Power Supply | 3.3V | single supply |
| Mechanics | 85 x 59 x 15 mm | self-stacking design 2.54 mm pitch through-hole connectors |
| RoHS conformity | yes | |
back to top| Data Sheets and Application Notes | |
|---|---|
| tdd6203.pdf | 
Technical Data Sheet |
| ansys.pdf |
Application Note System Design |
| ancmos.pdf |
Application Note CMOS Sensor Interface |
| User's Guide, Support Software, Updates | available for registered customers |
| Development Tools | |
|---|---|
| DS.C6203 | D.Module.C6203 Development Base Package including Support Software, User's Guide, Base Board, Power-Supply, and Cables |
| Code Composer Studio | Texas Instruments Code Composer Studio integrated software development and debugging environment |
| XDS510/XDS560 | JTAG in-circuit emulator, various models for parallel port and USB |
| Peripheral Modules | |
|---|---|
| D.Module.Peripherals | Data Acquisition, Networking, Communications, I/O |
| Ordering Information | |
|---|---|
| D.Module.C6203-300-D0 | standard module |
| DS.C6203 | development base package |
| DK.C6203 | complete development kit including D.Module.C6203, DS.C6203, Code Composer Studio, and XDS510pp_plus emulator |
| TMDSCCSALL-1 | Code Composer Studio |
| XDS560R | USB2.0 high-performance JTAG in-circuit emulator |
| XDS510USB | USB1.1 JTAG in-circuit emulator |
| XDS510USB PLUS | USB2.0 JTAG in-circuit emulator |
| XDS510USB galvanic | galvanic. isolated USB JTAG in-circuit emulator |
| XDS510pp_plus | parallel port JTAG in-circuit emulator |
| Please contact us or our international resellers for price, delivery, and volume discount information | |
| © D.SignT 1998-2009 | comments: webmaster@dsignt.de | Impressum / Imprint | last change: 2009-07-13 |