D.Module.C6713
TMS320C6713 high performance floating point DSP board
Designed for embedded standalone applications requiring maximum performance and flexibility:
- ultrasonic and eddy current analysis
- radar
- image processing
- multichannel speech processing
- voice recognition
- high-end measurement
- industrial control
As with all members of the D.Module family, the D.Module.BIOS handles low-level hardware programming and lets you focus on the 'real' signal processing tasks. Special care has been taken to facilitate field maintenance and serviceability. The Setup Mode provides straightforward file upload for program and parameter updates via RS232 terminal. The Module Config File stores configuration data in human-readable ASCII format and provides script mechanisms to control system startup. Setup mode also provides basic debug capabilities for field diagnostics without requiring special emulation hardware.
The modular, self-stacking concept facilitates building complete signal processing systems. Excellent system adaptability is provided by the integration of reconfigurable logic: Up to 42 I/O signals are user-programmable and can be configured to a variety of interfaces ranging from bit-programmable I/O to quadrature encoder interfaces, PWM, CMOS image sensor interfaces, etc. - even surpassing the versatility of most microcontrollers.
The TMS320C6713 DSP uses the VelociTI™ modified VLIW architecture, with up to eight instruction units operating in parallel. A two-level chache archtecture and a large internal memory provide the bandwidth to guarantee highest throughput. Data acquisition and memory block transfers are handled in background by an enhanced 16 channel DMA controller. On the D.Module.C6713 the DSP's Host Port Interface is usable as an expansion port which provides an additional path for high-speed data acquisition peripherals, enabling very high sample rates to be handled without the need for external buffers and FIFOs.
| Product Features | ||
|---|---|---|
| DSP | TMS320C6713B | 300MHz, 32Bit floating point, 32Bit fixed point, 16-channel DMA |
| Memory | DSP-internal | 192 Kbyte direct mapped memory and 64 Kbyte level-2 cache, 4 Kbyte L1 data cache, 4 Kbyte L1 program cache |
| SDRAM | 64 Mbyte, 100 MHz operation, 32-bit wide | |
| Flash | 2 MByte, 8-bit wide, sector architecture | |
| UART | 1 | max. 230.4 Kbaud RS232, 500 Kbaud RS422/485, 32 byte transmit and receive FIFOs, DMA support hardware and software auto flow-control RS232, optional RS422/485 |
| External Bus Interface | 32-bit data 20-bit address |
two pre-decoded memory areas, programmable timing and external wait states |
| Timer | 2 | 32 bit |
| Serial Ports | 2 | independent receiver and transmitter, up to 75 MBit/s throughput, reconfigurable to 2 x 8-channel McASP synchronous port optimized for audio applications |
| GPIO | 16 42 if HPI not used |
XC9572XL in-system programmable CPLD, 72 macrocells, in, out or bidirectional |
| I2C | 1 | |
| Miscellaneous | Watchdog JTAG Emulation Interface |
|
| Software | D.Module.BIOS | initialization and programming algorithms for all on board resources |
| Setup Utility | RS232-based field maintenance tool for program and data uploads, User-CPLD reprogramming, diagnostics | |
| Module Config File | ASCII configuration file for application-specific settings | |
| Power Supply | 3.3V | single supply |
| Mechanics | 85 x 59 x 15 mm | self-stacking design 2.54 mm pitch through-hole connectors |
| RoHS conformity | yes | |
back to top| Data Sheets and Application Notes | |
|---|---|
| tdd6713.pdf | 
Technical Data Sheet |
| ansys.pdf |
Application Note System Design |
| User's Guide, Support Software, Updates | available for registered customers |
| Development Tools | |
|---|---|
| DS.C671x | D.Module.C6713 Development Base Package including Support Software, User's Guide, Base Board, Power-Supply, and Cables |
| Code Composer Studio | Texas Instruments Code Composer Studio integrated software development and debugging environment |
| XDS510/XDS560 | JTAG in-circuit emulator, various models for parallel port and USB |
| Peripheral Modules | |
|---|---|
| D.Module.Peripherals | Data Acquisition, Networking, Communications, I/O |
| Ordering Information | |
|---|---|
| D.Module.C6713-300-D4 | standard module |
| D.Module.C6713-200I-D4 | industrial grade (-40..+85°C), 200 MHz |
| -422 | RS422/485 UART line interface |
| DS.C671x | development base package |
| DK.C6713 | complete development kit including D.Module.C6713, DS.C671x, Code Composer Studio, and XDS510 USB emulator |
| TMDSCCS-ALLxxx | Code Composer Studio |
| 701900 | USB1.1 JTAG in-circuit emulator |
| 701905 | USB2.0 high-speed JTAG in-circuit emulator |
| 701910 | galvanic. isolated USB JTAG in-circuit emulator |
| Please contact us or our international resellers for price, delivery, and volume discount information | |
| © D.SignT 1998-2010 | comments: webmaster@dsignt.de | Impressum / Imprint | last change: 2010-11-15 |