DSP-Board D.Module.C6713
Das D.Module.C6713 ist ein universell einsetzbares Floating-Point DSP System, basierend auf dem Texas Instruments TMS320C6713.
Dieses Prozessorboard wird weiterhin produziert, allerdings nicht für Neuentwicklungen empfohlen.
Für neue Projekte empfehlen wir das D.Module2.C6747.
Spezifikationen
| DSP | TMS320C6713 | 300 MHz floating-point DSP, 200 MHz in industrial grade |
| Memory | DSP-internal | 4K bytes data cache, 4K bytes program cache, 64K bytes level-2 cache, 192K bytes direct mapped memory |
| SDRAM | 128M bytes, 100 MHz operation, 32-bit wide | |
| Flash | 2M bytes NOR | |
| UART | 1 | transmit and receive Fifo, DMA support, RS232: max 230,4K baud, automatic flow-control, optional RS422/485: max. 500K baud |
| McBSP | 2 | independent receivers and transmitters, max. 50 Mbps throughput |
| Timer | 2 | 32-bit |
| I2C | 1 | master and slave mode |
| Host Port Interface | 1 | 16-bit |
| GPIO | 16/42 | bit-wise programmable, input or output, 42 if HPI interface is not used, XC9572XL user-programmable CPLD |
| External Bus Interface | EMIF | asynchronous transfers, 32-bit data bus, 20 address lines, 2 pre-decoded chip selects, configurable timing |
| System Supervisor | voltage and watchdog | |
| Emulation Interface | JTAG | |
| I/O Level | LVTTL / LVCMOS | 5V TTL/CMOS tolerant |
| Power Supply | 3.3V | single supply, 500mA typ. |
| Firmware | D.Module.BIOS | bootloader, board initialization, board configuration, flash memory programming, UART I/O |
| Setup Utility | program and data file uploads to the flash memory via UART | |
| Temperature Range | 0 – 70°C or -40 – 85 °C | |
| Connectors | 2,54mm pitch through-hole connectors | |
| JTAG | 14-pin, 2.54mm pitch | |
| Mechanics | 85 x 59 mm, overall height: 15mm | |
| ROHS | compliant |
Bestellangaben
| D.Module.C6713-300-D4 | standard module |
| D.Module.C6713-200I-D4 | industrial grade module, 200 MHz |
| Options | -422 : RS422/485 UART line interface |