DSP-Board D.Module2.TS203
Analog Devices TS203 TigerSHARC DSP Computer Modul mit hoher Floating-point Rechenleistung.
Dieses Modul kann nicht weiter produziert werden da elementare Bauteile wie der DSP vom Hersteller abgekündigt worden sind.
Für neue Projekte empfehlen wir das D.Module2.C6657
Spezifikationen
DSP | ADSP-TS203 | 500 MHz, 32/40-bit floating-point, 8/16/32/64-bit fixed-point, 3GFLOPS |
Memory | DSP-internal | 512K bytes |
DRAM | 64M bytes SDRAM, 125 MHz operation, 32-bit wide | |
Flash | 8M bytes NOR | |
USB | 2.0 | 480 Mbit/s |
UART | RS232, RS422, RS485 | transmit and receive Fifo, DMA support, automatic hardware- and software flow control. Port 1: RS232, max 230,4K baud, Port 2: RS422/485: max. 3M baud |
Timer | 2 | 32-bit |
GPIO | 16 | bit-wise programmable, input or output |
External Bus Interface | 32-bit | 32-bit data bus, 20 address lines, programmable timing, synchronous and asynchronous transfers up to 500M bytes/s |
Link Ports | 2 | LVDS high-speed links for multiprocessor clusters or FPGA interface, total throughput up to 1 Gbyte/s |
System Supervisor | watchdog, voltage supervisor | |
Emulation Interface | JTAG | |
I/O Level | LVTTL / LVCMOS | all signals except Link Ports: high level min. 2V, max. 3.5V, low level min. -0.2V, max. 0.8V, output drive: external bus interface:± 24 mA, all others ± 8 mA |
Power Supply | 3.3V | single supply |
Firmware | D.Module2.BIOS | bootloader, board initialization, board configuration, flash memory programming, UART and USB I/O |
Setup Utility | program and data file uploads to the flash memory via USB or UART | |
Config File | user- configurable text file with program and initialization parameters | |
Temperature Range | 0 – 70°C | |
Connectors | BUS1, BUS2, COM, EXP | Molex 71436-2164 |
JTAG | 14-pin, 2.54mm pitch | |
Mechanics | 86.8 x 58.4 mm, overall height including heatsink: 22.5mm | |
ROHS | compliant |
Bestellangaben
D.Module2.TS203 | standard module |
D.Module2.TS201 | option: ADSP-TS201 processor |
DK.TS203 | TS203 development kit including D.Module2.TS203, JTAG in-circuit emulator, D.Base1 base board, power supply, RS232 and USB cable, support software, user's guide, and free support via Email or phone |