View source for C6747 DSP + XDS510PP parallelport

== Preparation ==
# Install CCS 3.3
# Install SpectrumDigital Emulator Driver

Driver (external link):

http://support.spectrumdigital.com/ccs33/Release-30330/setupCCSPlatinum_v30330.ZIP


{{pagetop}}
== Code Composer 3.3 Setup ==
=== Create Board ===
# select [[File:XDS510pp_c6747_2.png]]
# choose SD510 Emulator
# add the emulator to System Configuration on the left side
#:[[File:XDS510pp_c6747_1.png]]
# in the new opened "Connection Properties" window type in a board name and press "next"
# select your emulators parallel port address (default 0x378) and press "finish"

{{pagetop}}
=== Add IcePick Router ===
# add the ICEPICK_C router to your system configuration
#:[[File:XDS510pp_c6747_3.png]]
# in the new opened "Router Properties" window name the router as you like and
# select the number of subpaths. in case of the L137 choose 3 subpaths
# in the next pane no input is needed, press next
# the number of subpath properties depends on the selected subpaths on the first pane:
#:[[File:XDS510pp_c6747_4.png]]
# change path name and value as shown in the picture and press finish

{{pagetop}}
=== Add Processor ===
# add processor [[File:XDS510pp_c6747_6.png]] from the center window to path17 on the left window
#:[[File:XDS510pp_c6747_5.png]]
# in the new opened window enter a custom processor name, e.g. C6747, and a suitable GEL file and press OK

{{pagetop}}
=== Final System Configuration ===
:[[File:XDS510pp_c6747_7.png]]
:press "Save & Quit"


{{pagetop}}
== Code Composer 4.x Setup ==
=== New Target Configuration ===
# select: "target" - "New Target Configuration"
# enter custom filename, e.g.: D.Module2.C6747.ccxml

{{pagetop}}
=== Basic settings ===
# the file you entered under "[[#New Target Configuration|New Target Configuration]]" is opened
# select under "Connection" [[File:XDS510pp_c6747_8.png]]
# under "Device" enter filter text "C67" and select device [[File:XDS510pp_c6747_9.png]]
# press save
# the resulting configuration should look like:
#:[[File:XDS510pp_c6747_10.png]]


{{pagetop}}
== Additional Tags ==
SpectrumDigital, TexasInstruments, Parallel Port, C674x, C6400+, C6400plus

 [[category:XDS510PP plus]]